CELOspArk® Zinc plated screw, Pan head TORX PLUS®

For an optimal direct assembly of ductile plastics.
CELOspArk® Zinc plated screw, Pan head TORX PLUS®
CELOspArk® Zinc plated screw, Pan head TORX PLUS®

Product overview

CELOspArk® screw with an improved 30º thread design solves the problem of boss bursting and provides greater safety in the assembly process into ductile plastics.

It provides lower thread forming torque for a more ergonomic assembly and higher pull-out, stripping and vibrational loosening resistant .

Apart from the reference available in stock, we produce customized screws under different dimensions and coating configurations.

Samples
3D CAD Files
Quotation

List of references

Filters
Screw diameter (mm)
1.8
2.0
2.5
Close
Screw length L (mm)
6
8
Close
Head diameter D (mm)
3.20
3.40
4.30
Close
Recess
TORX PLUS® 5 IP
TORX PLUS® 6 IP
TORX PLUS® 8 IP
Close
Reference
J
d
186SP81P
26SP81P
258SP81P
Screw diameter (mm)
J
d
1.8
2.0
2.5
Screw length L (mm)
J
d
6
6
8
Head diameter D (mm)
J
d
3.20
3.40
4.30
Recess
J
d
TORX PLUS® 5 IP
TORX PLUS® 6 IP
TORX PLUS® 8 IP
3 / 3 references are shown

Hole parameters calculator

In order to ensure a safe installation and stable clamping force, it's relevant to pay attention to the boss design. The recommended dimensions for core hole diameter and length of engagement are available at Design Guidelines. Go to Design Guidelines
https://www.celofasteners.com/img/cms/category-products/plastic/boss-design-plastic.jpg

Applications

CELOspArk® screw is recommended for the assembly of ductile plastics. The design of CELOspArk® screws meet the standards of a large number of electric material, electronics and automotive manufacturers (i.e. VW 603 62).
https://www.celofasteners.com/img/cms/products/celospark-screw-application.jpg

Do you have any questions about this product?

Request more info