REMFORM® II F™ Zinc plated screw, Pan head TORX PLUS® AUTOSERT®

For the assembly of very hard plastic thermoset materials, Magnesium and Aluminum light alloys.

REMFORM® II F™ Zinc plated screw, Pan head TORX PLUS® AUTOSERT®
REMFORM® II F™ Zinc plated screw, Pan head TORX PLUS® AUTOSERT®

Product overview

REMFORM® II F™ thread forming screws are specially designed for the assembly of very hard plastics, thermoset, Magnesium, Aluminum light alloy and other non-ferrous materials including copper, brass, etc.

The smaller pitch of REMFORM® II F™ screws provides larger shearing zone, increasing pull-out and vibrational loosening resistance.

Apart from the references available in stock, we produce customised screws to fit your exact requirements.

Samples
E-shop
3D CAD Files
Quotation

List of references

Filters
Screw diameter (mm)
3.0
3.5
4.0
5.0
Close
Screw length L (mm)
8
10
20
12
Close
Head diameter D (mm)
5.30
6.20
7.00
9.00
Close
Recess
TORX PLUS® AUTOSERT® 10 IP
TORX PLUS® AUTOSERT® 15 IP
TORX PLUS® AUTOSERT® 20 IP
TORX PLUS® AUTOSERT® 6 IP
Close
Reference
J
d
38F281PA
310F281PA
320F281PA
3510F281PA
410F281PA
412F281PA
520F281PA
Screw diameter (mm)
J
d
3.0
3.0
3.0
3.5
4.0
4.0
5.0
Screw length L (mm)
J
d
8
10
20
10
10
12
20
Head diameter D (mm)
J
d
5.30
5.30
5.30
6.20
7.00
7.00
9.00
Recess
J
d
TORX PLUS® AUTOSERT® 10 IP
TORX PLUS® AUTOSERT® 10 IP
TORX PLUS® AUTOSERT® 10 IP
TORX PLUS® AUTOSERT® 15 IP
TORX PLUS® AUTOSERT® 20 IP
TORX PLUS® AUTOSERT® 20 IP
TORX PLUS® AUTOSERT® 6 IP
7 / 7 references are shown

Hole parameters calculator

In order to ensure a safe installation and stable clamping force, it's relevant to pay attention to the pilot hole configuration. The recommended dimensions for core hole diameter and length of engagement are available at Design Guidelines. Go to Design Guidelines
https://www.celofasteners.com/img/cms/category-products/plastic/boss-design-plastic.jpg

Applications

REMFORM® II F™ screws are recommended for the assembly of: Highly reinforced plastics and thermoplastic parts in applications where the length of engagement is lower than optimal. Magnesium elements with drilled, injected or punched holes. Aluminum profiles with open holes.
https://www.celofasteners.com/img/cms/products/f281pa-screw-application.jpg

Do you have any questions about this product?

Request more info