Hole calculator

CELO's tool for screw hole design provides the hole sizes of thread forming screws, for plastic and metal. 

To ensure a safe installation and guarantee a stable clamping force it is important to pay attention to the hole dimensions and boss design. In a few easy steps, obtain the hole configuration for optimal screw performance.  

Hole design for thread forming screws

CELO's tool for screw hole design provides the hole sizes of thread forming screws, for plastic and metal.

To ensure a safe installation and guarantee a stable clamping force it is important to pay attention to the hole dimensions and boss design. In a few easy steps, obtain the hole configuration for optimal screw performance.

Hole design for thread forming screws

CELO's tool for screw hole design provides the hole sizes of thread forming screws, for plastic and metal.

To ensure a safe installation and guarantee a stable clamping force it is important to pay attention to the hole dimensions and boss design. In a few easy steps, obtain the hole configuration for optimal screw performance.

Hole dimensions for plastic assemblies

Hole dimensions for aluminum and magnesium die casting

Hole dimensions for sheet metal assemblies

Recommended boss design and hole dimensions for different types of thermoplastics (PA, ABS, PPA+30GF...).

REMFORM®, REMFORM® II HS™, REMFORM® II F™, PLASTITE®

Hole configuration for aluminium and magnesium die casting parts and aluminum extruded profiles.

TAPTITE 2000®, TAPTITE II®,REMFORM® II F™, REMFORM® II F™

Hole configuration for drilled or extruded holes of thin sheet in aluminum and steel.

FASTITE® 2000™, EXTRUDE-TITE®,         STRUX®, STRUX SM™

Hole dimensions for plastic assemblies

Recommended boss design and hole dimensions for different types of thermoplastics (PA, ABS, PPA+30GF...).

REMFORM®, REMFORM® II HS™,REMFORM® II F™, PLASTITE®

Hole dimensions for aluminum and magnesium die casting

Hole configuration for aluminium and magnesium die casting parts and aluminum extruded profiles.

TAPTITE 2000®, TAPTITE 2000®,              REMFORM® II F™

Hole dimensions for sheet metal assemblies

Hole configuration for drilled or extruded holes of thin sheet in aluminum and steel.

FASTITE® 2000™,EXTRUDE-TITE®, STRUX®, STRUX SM™

Do you need help with hole design?

Our application engineering team is at your disposal. 

Benefits of using an optimized hole design

  • Save time during the design stage and reduce your assembly costs.
  • Eliminates the risk of cracks
  • Increases durability and overall efficiency
  • Ensures stable clamping force
  • Save time during the design stage and reduce your assembly costs.
  • Eliminates the risk of cracks
  • Increases durability and overall efficiency
  • Ensures stable clamping force

The perfect tool to optimize your assembly design

PROVEN DATA

Data backed by REMINC® and our experience and support of thousands of applications.

We provide the hole sizes for TAPTITE 2000®, REMFORM®, REMFORM® II HS™ and FASTITE® 2000™ screws.

TECHNICAL SUPPORT

Our application engineers have extensive experience and knowledge in joint design to advise you on the best solution for your assembly.

TIME OPTIMISATION

Get the results in a pdf file instantly and keep it for future use.

PROVEN DATA

Data backed by REMINC® and our experience and support of thousands of applications.

We provide the hole sizes for TAPTITE 2000®, REMFORM®, REMFORM® II HS™ and FASTITE® 2000™ screws.

TECHNICAL SUPPORT

Our application engineers have extensive experience and knowledge in joint design to advise you on the best solution for your assembly.

TIME OPTIMISATION

Get the results in a pdf file instantly and keep it for future use.

Follow the steps to get to the recommended hole dimensions

Select the units to calculate the dimensions of the hole. There is the option of mm and inches. These units are independent of the unit of measurement of the screw, i.e. you can select inches or a screw in metric size.

Choose the type of fastener for which you wish to calculate the hole dimensions. If you are in doubt about the type of product to use, please contact our application engineers. 

Get the pilot hole sizes for TAPTITE 2000®, REMFORM®, FASTITE® 2000™ and STRUX SM™.

This calculation will depend on your design and the mechanical requirements of the assembly. If required, our technicians can help you to determine the optimum diameter for your application.

From the available list, select the base material for your assembly. If you do not find your material, please contact our application engineers. 

In the case of thin sheets, it will also be necessary to indicate the thickness of the sheet.

Especially for assemblies on metal, different types of holes can be considered: drilled, injected or extruded.

Select the units to calculate the dimensions of the hole. There is the option of mm and inches. These units are independent of the unit of measurement of the screw, i.e. you can select inches or a screw in metric size.

Choose the type of fastener for which you wish to calculate the hole dimensions. If you are in doubt about the type of product to use, please contact our application engineers. 

Get the pilot hole sizes for TAPTITE 2000®, REMFORM®, REMFORM® II HS™ and FASTITE® 2000™ screws.

This calculation will depend on your design and the mechanical requirements of the assembly. If required, our technicians can help you to determine the optimum diameter for your application.

From the available list, select the base material for your assembly. If you do not find your material, please contact our application engineers. 

In the case of thin sheets, it will also be necessary to indicate the thickness of the sheet.

Especially for assemblies on metal, different types of holes can be considered: drilled, injected or extruded.

Follow the steps to get to the recommended hole dimensions

Select the units to calculate the dimensions of the hole. There is the option of mm and inches. These units are independent of the unit of measurement of the screw, i.e. you can select inches or a screw in metric size.

Choose the type of fastener for which you wish to calculate the hole dimensions. If you are in doubt about the type of product to use, please contact our application engineers. 

Get the pilot hole sizes for TAPTITE 2000®, REMFORM®, FASTITE® 2000™ and STRUX SM™ screws.

This calculation will depend on your design and the mechanical requirements of the assembly. If required, our technicians can help you to determine the optimum diameter for your application.

From the available list, select the base material for your assembly. If you do not find your material, please contact our application engineers. 

In the case of thin sheets, it will also be necessary to indicate the thickness of the sheet.

Especially for assemblies on metal, different types of holes can be considered: drilled, injected or extruded.

Need support on your design?

Our application engineers are available to support you during the development and design process. Please fill in the form and they will get back to you shortly.