FASTITE® 2000™ Zinc plated screw, Pan head with serrations, POZI

The best cost-effective solution for JOINING THIN METAL SHEET

FASTITE® 2000™ Zinc plated screw, Pan head with serrations, POZI
FASTITE® 2000™ Zinc plated screw, Pan head with serrations, POZI

Product overview

FASTITE® 2000™ screws solve common fastening problems when joining thin metal sheet, assuring clamping force and stripping resistance whilst offering opportunities for cost reduction.

The unique FASTITE® 2000™ thread rolling screws are the best cost-effective solution when joining steel and aluminum thin sheets with untapped holes. It offers a strong mechanical joint with excellent pull-out and vibration loosening resistance. 

Apart from the references available in stock, CELO produces customised screws to fit your exact requirements.

Samples
E-shop
3D CAD Files
Quotation

List of references

Filters
Screw diameter (mm)
4.0
5.0
3.0
Close
Screw length L (mm)
7
9
6
Close
Head diameter D (mm)
8.00
10.00
6.00
Close
Recess
POZI Z2
POZI Z1
Close
Reference
J
d
47FT85Z
59FT85Z
36FT85Z
Screw diameter (mm)
J
d
4.0
5.0
3.0
Screw length L (mm)
J
d
7
9
6
Head diameter D (mm)
J
d
8.00
10.00
6.00
Recess
J
d
POZI Z2
POZI Z2
POZI Z1
3 / 3 references are shown

Hole parameters calculator

In order to ensure a safe installation and stable mechanical resistance, it's relevant to pay attention to the pilot hole diameter. The recommended dimensions for pilot hole diameter for different plate thickness are available at Design Guidelines. Go to Design Guidelines
https://www.celofasteners.com/img/cms/category-products/thin-metal/boss-design-thin-metal-screws.jpg

Applications

FASTITE® 2000™ screws have been specially designed for the assembly into untapped thin aluminum and steel sheets. FASTITE® 2000™ screws are the best alternative to self-tapping screws: unthreaded length below the head is larger than the thickness of the assembly, causing the screw to clip the sheet.

Do you have any questions about this product?

Request more info